Jazz Digit 4G Power Hang On Logo Problem Solved

Jazz Digit 4G Power Hang On Logo Problem Solved All Versions:

I will share Jazz Digit 4G Power Hang On Logo Problem Solved on this page. I will show you how you can solve the logo hang problem on your Jazz Digit 4G Power mobile.

If your jazz digit 4g power mobile is stuck on the logo screen and it’s not going ahead then you are at the right place because here I am going to provide you the complete method and files to solve that problem.

Jazz Digit 4G Power Hang On Logo Process:

First of all download the tested firmware from down below link and save it to your PC. After that extract it. You will need WinRAR to extract the firmware. After that, you have to flash your Jazz Digit 4G Power mobile and install that firmware into it.

For that you can use any firmware tool, I am going to use the CM2MT2 Tool. You can use Sp Flash Tool or any other flashing Tool. To use the CM2MT2 Tool you must have Infinity Dongle CM2.

After downloading the Cm2MT2 Tool you have to launch it. In the “Platform” Tab, enable the Custom Settings then click on the “EMI” and upload the preloader file. Check the below pic.

After that go to Flash Tab and upload the Tested Firmware for your Jazz Digit 4G Power mobile and click on the “Flash”. Now you have to turn off your mobile and press the “0” button and connect the cable. By doing this the flashing process will start.

Now you just have to wait for the flashing process to complete. After that disconnect your mobile and start using it. Jazz Digit 4G Power hang on logo problem is solved successfully.

You can also repair your dead Jazz Digit 4G Power Mobile with the same method. You can also check out the “Jazz Digit 4G” Category for more unlocking and flashing tools and methods.

Dont forget to visit my Youtube channel. My Youtube channel link is::: Afridi Tech

Jazz Digit 4G Power Preloader file

Wait for the timer to download the Firmware